2008 Ford Escape Problems

RepairPal has identified the most common problems with the 2008 Ford Escape as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.

Refine by vehicle
×
Choose your vehicle
6
Known Problems

The 2008-2012 Ford Escape with manual temperature and fan controls may have problems with the the blower motor only blowing air on certain settings. Most commonly the fan will only run on the highest setting. This is a well documented problem, and is caused by a failing blower motor resistor.

Correcting the problem is straight forward, and requires replacement of the small resistor. The resistor is normally found behind the glove box, next to the blower motor.

The common problem for ignition misfires are ignition coils going bad. Replacement of the bad ignition coil is necessary. These should be fixed as soon as a problem is detected. Otherwise the misfire can cause damage to other components.

An abnormal noise may develop from the transfer case. At this time parts are not available to repair internal damage to this type of transfer case, replacement is the only option. It is not uncommon for irregular tire wear to cause a similar noise. Diagnoses should be performed to confirm the actual cause of the driveline noise. Tire noise can be reduced by rotating the tires at least every 5000 miles.

The DPFE (differential pressure feedback EGR) sensor tends to fail. The DPFE sensor monitors function of the EGR valve by measuring pressure changes in the exhaust gas recirculation (EGR) system. Symptoms of a failing DPFE sensor are hesitation or stumbling when driving along with illumination of the Check Engine Light.