Engine Misfire Due to Oil in Spark Plug Tubes on Chrysler Sebring

Spark plug tube seals fail, causing the tubes to fill with engine oil and the engine to misfire. As a result, the engine may run poorly and fuel economy can suffer.

RepairPal Verified
Average mileage: 127,571 (100,000–151,000)
Engines affected: 2.4L 4 Cylinder, 2.5L V6, 4 Cylinder
4 model years affected: 1998, 1999, 2000, 2005 more
13 people reported this problem
5 people shared problem details
2000 Chrysler Sebring- 2.5L V6120,000
spark tubes full of oil
4 people like thisFlag inappropiate
1998 Chrysler Sebring- 2.5L V6131,000
Car would not turn over, replaced fuel pump and filter, car worked well for two days then broke down again. Checked spark plugs and tubes are filled with oil. Getting ready to replace tube seals and see if this repair problem.
1 person likes thisFlag inappropiate
1999 Chrysler Sebring- 2.5L V6110,000
Misshapened spark plug tube seals created significant oil leak and misfire. Had to order new tube seals with gasket... Looked like a manufactured defect.
1998 Chrysler Sebring- 2.5L V6147,000
cranks but no spark. pulled intake to get to back plugs holes were full of oil
2000 Chrysler Sebring- 2.5L V6
oil in spark plug tubes ,causing rough idle misfires and poor fuel economy
Related Items:
A plugged AC evaporator drain tube can cause a water leak inside the car; usually near the fron...
I change the oil pan gasket but I still have a oil leak some where in the back side of the moto...
The exhaust is white and one spark plug is covered in oil (around threads). I cannot really dri...
I found a 2005 Chrysler Sebring 140k miles on it forsale for $2000 all they want is the payoff...

Related Content