Share
-
Google+
-
Facebook
-
Twitter
-
Email
» Excessive oil pressure due to faulty oil pump
Dodge Ram Van 2500
Report: Excessive oil pressure due to faulty oil pump
Dodge Ram Van 2500 Problem
Model Years Affected: 1995, 1999
Verified
The engine may exhibit excessively high oil pressure at cold start up. This may lead to distortion of the oil filter case. Inspect the oil filter case for any signs of distortion. If the case is distorted, Connect an oil pressure gauge to the engine and start the engine while observing the readings. If the pressure reads above 80 psi, replace the oil pump.
-
dodge ram van 2500, 110,000 mi. 5.2 l engine. At idle and after warm up, Check Gauges light comes on and and oil gauge needle falls to zero. Replaced sensor and tested pressure with manual gauge co...
Q&A > Dodge > 1998 Dodge Ram Van 2500
-
I have a V10 engine and no oil pressure and when I take off the oil filter off to see if there...
Q&A > Dodge > 1999 Dodge Ram Van 2500
-
Our Van will not start and has no power to fuel pump we have bypassed the relay and the fuel pu...
Q&A > Dodge > 1996 Dodge Ram Van 2500
-
On 3.9L V6 and 5.9L V8 engines, the intake manifold gasket may leak and cause increased oil co...
Common Problems > Dodge Ram Van 2500
-
do some of the bolts on the water pump require sealing?
Q&A > Dodge > 1996 Dodge Ram Van 2500