engine replacement on 2004 Ford F-150

i put 05 motor in my 04 truck. truck want crank. had pcm flashed still want crank

by in Wilmington, NC on April 21, 2009
2 answers
ANSWER by on April 21, 2009
Are there any codes stored? Are you getting power to the starter motor from the ignition switch when cranking?
ANSWER by on April 17, 2010
is crank sensor plugged in is it possible it has a bad cranks sensor on the replacement engine check codes first
Related Items:
check engine light just came on and code is P0302 for #2 cyclinder
I'm noticing that my engine seems to be sluggish when it start sometimes, I have checked the oil and it is clean and level. I'd like to know what anybody has for an idea as to how I can better pinp...
At idle and when holding a constant speed a slight roughness is noticed. Seems to go away when accelerating. Nothing seen via the tach in regards to large variations in RPM. Plugs and wires were re...
when accelerating the engine misses really bad. If I back off the gas pedal it seems to smooth out some. It does not do this all the time but when it does it is when I am accelerating.
I had a vacuum leak and my MAF cleaned. I use some Sea Foam, but it still didn't help the problem. My truck won't accelerate up to speed like it loses power and it kicks and hesitates. At one point...

Related Content