Q&A

2004 Dodge Stratus

Question: engine is misfiring

Question

chenieves, 2.4L 4 Cylinder, Kissimmee, FL, January 17, 2011, 06:50

 Rookie

after changing my tps sensor and the iac valve o2 sensor put in a new coil spark plug and wiring and still misfiring in spark plugs 1 and 4 why?

1 Answer

Answer It

Flag This

Follow this Question Unfollow this Question

• Answer #1

  CFAR from Central Florida Auto Repair Inc, January 17, 2011, 07:33
  

   Technician

  could be a lean cylinder-need a proper diagnostic to find cause and save money
  Reply
  Flag This
  Like0

• Failure in Spark Plug Tube Seals May Cause Misfire and Poor Fuel Economy
  Spark plug tube seals fail, causing the tubes to fill with engine oil and the engine to misfire. As a result, the engine may run poorly and fuel economy can suffer.

  Common Problems > Dodge Stratus

• mis fire
  i have a 2000 stratuss 2.4l dohc ,every once in a while i get a misfire on cylinder 1 . i have no loss of power. i`ve changed the plugs the wires are in good shape and i even put in a fuel injectio...

  Q&A > Dodge > 2000 Dodge Stratus

• my car is doing alot of shaking i was told that it's misfiring
  so i had my spark plugs replaced new oil gasket and am still having the same problem with it but it only does it when am stopped at a light or stop sign. Then it goes dead but cranks back up.I even...

  Q&A > Dodge > 2004 Dodge Stratus

• my car tends to shake only when i stop at signs or lights.
  i was told that it may be the motor mounts, front, 2 right, and transmission. Today as i was he...

  Q&A > Dodge > 2004 Dodge Stratus

• Cylinder 3 misfire error from engine scan - what do I do?
  So far I have replaced the spark plugs, the wires, and THOROUGHLY cleaned the EGR Valve - but I still get a very rough engine idle and a big loss of power - check engine light WAS on, but I took of...

  Q&A > Dodge > 1997 Dodge Stratus