engine idle very high at` 2500 rpm on Chrysler Sebring

Average mileage: 117,009 (88,000–181,332)
Engines affected: 2.4L 4 Cylinder, 2.5L V6
4 model years affected: 1996, 1997, 1999, 2001
12 people reported this problem
7 people shared problem details
1996 Chrysler Sebring- 2.5L V6130,000
Idles high at 2500 rpm, then when put in gear drops to 1500. Then while driving still idles high and when foot is off the throttle car doesn't slow down due to high idle.
1996 Chrysler Sebring- 2.5L V688,000
rpm's stay at 1500.
1997 Chrysler Sebring- 2.5L V6
engine idle very high at` 2500 rpm after valve cover gasket change
1999 Chrysler Sebring- 2.5L V6114,000
Engine idles at around 2500 rpm until put into gear and then drops to around 1200 rpm.
Replaced water pump and now when car start idles at 2000 rpm
engine idle very high
1999 Chrysler Sebring- 2.5L V6
replaced idle sensor and crank sensor and now it races on idle. To high to drive it safely
Related Items:
what causes car to idle high and jerk forward with foot on brake when stop and/or slowing down
car idles up to 20 mph when at a light but only with the a/c on. It runs just fine without the...
My oil warning light has begun to glow after the car is fully warmed up (15 minutes driving) and the car is idling (typically, stopped at a traffic light.) As soon as I accelerate, the light goes ...
The engine runs perfect, has good power. I just replaced the water pump, timing chain and hydra...
For the last few months, when driving the car, the engine sounds loud as if accelerating consta...

Related Content