1994 Mercury Grand Marquis Q&A

1994 Mercury Grand Marquis Question: engine get hot

1994 Grand Marquis is over heating it has a pin hole at the back of the engine small hose that clamps to the engine there is a pin hole right under the hose that hose connects to the Temperature-sensing electric heater control valve and the engine i put JB weld on the hole it runs for 30 minutes then steam come out were the hole is and the engine gets hot. -
Answer 1
First, it seems like you may want to repair this leak once and for all. Replace whatever is leaking with new parts. JB Weld is not going to help... Once you have repaired the integrity of the cooling system, recheck for further overheating or other issues. -
Related Items:
My A/C is blowing very hot air. What is my problem?
Engine light came on. A readout says it is a temperature sensor or dashboard temperature unit.
Blower motor stopped running. Blower motor and blower start relay appear to be ok because blower runs when I jumper hot side of blower to plug in wiring harness and ground side of blower to ground....
my heater doesnt work it wont heat at all