Even thou u answered my question. I understand what u was saying, but I can get the belt off of the wheels but its a bar at the bottom that the belt go around and that's the part I can't get the belt from around .Do the bar slide out or something. 1995 park avenue
drive belt on 1995 Buick Park Avenue
by mystery in Houston, TX on April 14, 2009
ANSWER by Russ on April 14, 2009
The spacer bar does slide out. There is a log stud that goes through the spacer bar and then the mount bracket. There is a nut on the outside of the bracket. Remove the nut and then remove the stud - you will need a inverted torx socket to remove the stud. With the stud out the spacer bar will side out, it's a bit tricky but it will side out. With the spacer bar out you can remove the belt.
Tried to change drive belt but won't come off looks like its around a bar or something can u help me
My 1996 Buick Park Avenue Supercharger belt came off and pulley is not turning either. Could this possibly mean that my Supercharger is broken and is it okay to cut the belt off and drive it with t...
This is my elderly sister's car. There is a clicking sound under the hood and her mechanic cannot find the source. Replaced alternator and belt. Is there a sensor or bearing that would make that sound and not show up on a diagnostic check?
Can't be brakes because it happens while idling. She can't afford to have them guess. It really is a nice car.
I've looked all over the passenger side of the engine on the serpine belt, but still can't find the power steering reservior
Wasn't doing this before I did tune up, added new fuel pump, adv valve was changed, exhaust hole patched, supercharger oil drained 2x, new battery, changed starter, serpentine belts and so on. Car ...