2007 Dodge Ram 1500 Questions

Unanswered 2007 Dodge Ram 1500 Questions

Ask a Question
View:RecentAnsweredUnanswered
I hooked up obd reader and no codes present. . Checked all fuses especially door locks. All fine. I can smell fuel at tail pipe. My key fob works. Im home alone so I haven't checked for spark yet which I know is my ne...
It will cost $500.00 each side. Is there any refund for this work from Dodge. I have noticed a lot of Dodge trucks around my year that are the same way. Was the metal used for mine and other years recycled metal and ...
Shifts ok in all other gears is there a Transmission Control Solenoid that controls reverse?
So my ram just cranks over and doesn't start after cranking it over i smell no gas and i don't think i hear the fuel pump running the fuel pump should be loud enough to hear right even in the tank?? Or do i have anoth...
the code reader that i have keeps throwing the code that the camshaft positioning sensor is faulty. I have replaced the crankshaft sensor and the camshaft sensor cleared the code but it keeps popping the code up. and ...
I was driving tonight and going about 30mph through a neighborhood, stopped at a stop sign, when I started to drive the engine cut out and a check gauges light came on. I lost power steering but all the interior ligh...
This code is something to do with clutch plate over travel and the only bulletin info i could find said to monitor sensor voltage while shifting transfer case and it stays well within spec and the result tells me this...
More leakage when the weather temp degrees are greater and only when parked.
in higher gears when pressing on gas pedal for the first little bit acceleration is slow and lacks power and in order to get full acceleration with power gas pedal has to be pressed down way too far
my condenser freezes over sitting at idle