1997 Dodge Ram 1500 Questions

Answered 1997 Dodge Ram 1500 Questions

Ask a Question
View:RecentAnsweredUnanswered
i have replaced the aic,crank shaft sensor, tbc,map sensor,cam sensor,coil, cap and bug and my truck still is running ruff i have 97 dodge ram 1500 5.9 lilter engine
Get to 45mph and it is bad shaking n jumping. Let off the gas and it stops immediately. Can coast as fast as I want with no issue. It only starts when accelerating.Please Help!!! Was only once in awhile at first now i...
i bought a 97 lifted ram 1500. the guy told me that it has an electronic shift kit in it which causes the check engine light to come on. i took it to advanced to have find out the code and I got a p0470- torque conver...
I started having trouble with trans not shifting by its self.would shift just fine if shifted by hand.took it to shop and was told it was the governor pressure sensor and the governor pressure solenoid Changed these s...
Truck has no power and bogges down down when given throttle. I have changed the plugs, distributor cap and rotor. Still did not fix the problem. Replaced the throttle position sensor and thought I found the problem ...
on my way home it started acting like it was losing power when i pushed on gas at green light i let off gas then pushed it again it stop bout five mins latter it started doing it again then let off gas cuz of red ligh...
I have replaced the plugs, distributor cap, rotor. check the thtrottle body sensor and the volteage did not increase when the throttle was moved so I replaced the throttle body sensor. Checked it and the voltage incre...
Only leaks while running and shortly thereafter. Leaking down between the bell housing and oil pan. Leak just began yesterday and is significant. What is it and what do I have to tear apart to fix it?
TNumber 7 cylinda miss fire I've checked everything and every tree trips the code po307 comes up and at about 80 cycles the mil will turn off then after three trips
I took a test light and checked motors. All have power to them. Ground is good. I bought a new motor and hooked it up. Still nothing. I have power at the switch also.