» » »

Problems for specific Dodge Nitro years:

Car problem reports

Report A Problem

Problem with your car? See what our experts say or submit your own.

Repairpal verified 2007 Dodge Nitro problems

 

Verified for the Dodge Nitro

The overhead video screen may not power on, updating the video entertainment system software may be necessary to correct this concern.

7 Reports
Me Too

Verified for the Dodge Nitro

A ringing sound may be noted when shifting from drive to reverse or reverse to drive. Our technicians tell us that replacing the transmission output flange and applying a special substance to the transmission output shaft splines should correct this issue.

1 Report
Me Too

Verified for the Dodge Nitro

The front of the roof rack may begin lifting from the roof. Replacing the adhesive tape at the front of the side rails should correct this concern.

16 Reports
Me Too

Verified for the Dodge Nitro

One or more of the power door locks may become inoperative. Our technicians tell us that modifications to the door hardware and door panel may be necessary to correct this issue.


27 Reports
Me Too

Verified for the Dodge Nitro

Some vehicles may develop a musty odor coming from the HVAC system, Dodge has issued a cleaner/disinfectant and a coating for the evaporator designed to inhibit bacterial growth.

6 Reports
Me Too

Verified for the Dodge Nitro

A rattle sound may be heard from the engine with the AC on. This can be caused by not enough clearance between the serpentine belt and the belt tensioner arm stop. Replacing the serpentine belt will commonly correct this problem.

2 Reports
Me Too

Verified for the Dodge Nitro

A coolant leak may be noted from the coolant reservoir. There is a service bulletin to relocate the coolant bottle vent hole to correct this condition.

7 Reports
Me Too

Verified for the Dodge Nitro

The remote start or keyless entry system may not function at times. A service repair kit is available which should correct this condition.

11 Reports
Me Too

Verified for the Dodge Nitro

The anti-theft system may cause a no start condition due to electrostatic discharge (ESD) affecting the wireless control module (WCM). There is an updated WCM to correct this issue.

31 Reports
Me Too

Verified for the Dodge Nitro

Owners may experience one or more of the following conditions: Transmission shifting issues, torque converter clutch apply issues, fault code P0741 (torque converter clutch performance), and a vehicle surge condition. Our technicians tell us that in most cases these issues may be corrected by updating the Powertrain Control Module (PCM) software.

1 Report
Me Too

Verified for the Dodge Nitro

Vehicle owners my experience one or more of the following conditions: Rough idle or idle drop upon gear engagement after cold start, vehicle surge, grumble/drone during torque converter apply, and shift quality issues from first to second gear.  Our technicians tell us that updating the powertrain control module (PCM) software may correct these issues.

2 Reports
Me Too

Verified for the Dodge Nitro

The Check Engine Light may illuminate with code P0123 and/or P0222 when the vehicle is operated in below freeing temperatures. Our technicians tell us replacing the electronic throttle body and clean air duct should correct this concern.

4 Reports
Me Too

Verified for the Dodge Nitro

A chirp noise may be noted from the serpentine belt when the steering wheel is at full lock and the engine is at idle. Our technicians tell us a revised belt tensioner is available to correct this concern.

2 Reports
Me Too

Verified for the Dodge Nitro

Some vehicles may experience a high pitched whistle under light throttle conditions. This can be corrected by resealing the throttle body at the intake manifold using a small amount of rtv sealer.

1 Report
Me Too

Verified for the Dodge Nitro

Vehicles may exhibit steering and/or suspension issues, mostly noticed at freeway speeds while changing lanes. Our technicians tell us that suspension neutralization can correct these issues. Suspension neutralization consists of loosing all suspension components, bouncing the vehicle numerous time to let the components settle, and then re-torquing all fasteners to specifications.

1 Report
Me Too
Ask a Question