1996 Dodge Dakota Questions
Answered 1996 Dodge Dakota Questions
Ask a Question
the park lights work however the turn signals do not
a couple days ago my v8 magnum dodge Dakota started acting funny.. what I mean is that now we have to step on the gas n rev the engine up in order to get the truck to idle n run but also now needs to be revved every t...
Lately a few times all the lights on the cluster go on and all the gauges are pegged. Whacking the dash board cleared it up each time. I just wonder how involved a job it will be to really fix this. Thanks.
now that its cold here and snow is down 9 degs im finding miss fires on all cylinders. don't feel them it just comes up as pending codes . changed timing chain set. I think its time to get rid of this thing
hooked up a real time scanner to my truck and it looks as though im getting distributor advance that bounces from 13 to 17 at idle. also changed injectors again but still get misfires codes 300 and then 301 303 305 on...
crank pulley wobbles a little. Can timing chain make noise like rod knsock, also does this engine have timing chain slap issues. On a standard trans is crank pulley a hamonic balancer or just pulley? Thanks for any us...
ive replaced all sensors and intermittently misfire codes come up but there all on the left side . ive even replaced injectors. have done a leak test. had fuel pump replaced. compression test all cylinders are 170...
can't find filter.
can I use engine flush
Just bought a used Dakota and the ABS indicator & Brakes indicator lights on the control panel/dash board are lit up.
I have found no water exposure and the bulb is safely held in place not loose when I pull it out, but the bulb itself is shattered. I replaced it 2 months ago and two months before that
having trouble finding the cam sensor for this truck please help
Codes are PO135 po132 upstream 02&Heated o2, P1391 loss of CMP or CKP, PO443 purge selenoid open or shorted, PO320 No crank sensor ref signal to the PCM.THINGS THAT ARE NEW: plugs&wires -cap & rotor button- distribute...
has anyone replaced the metal fuel line in between the tank and the motor? mine has rusted thru, and needs replaced/repaired. 96 dak 318 fuel injected.