» » »

Problems for specific Dodge Caliber years:

Car problem reports

Report A Problem

Problem with your car? See what our experts say or submit your own.

Repairpal verified 2007 Dodge Caliber problems

 

Verified for the Dodge Caliber

A no crank or no start condition may be the result of a theft system fault. Our technicians tell us that replacing the wireless control module should correct this condition.

3 Reports
Me Too

Verified for the Dodge Caliber

A swish sound may be noted from the rear over low speed bumps. Our technicians tell us that new shock caps are available to correct this issue.

2 Reports
Me Too

Verified for the Dodge Caliber

The front struts may wear prematurely, resulting in poor handling and/or a rough ride. Struts may also be diagnosed as leading. When replacing front struts on 2007 - 2009 vehicles, the jounce bumper should be inspected. If it is found to be a one-piece black rubber part, it should be replaced with a newly designed jounce bumber end dust shield.

22 Reports
Me Too

Verified for the Dodge Caliber

The AC compressor may be damaged during cold weather conditions due to refrigerant "slugging." Our technicians tell us that the repair involves replacing the AC compressor and the condenser.

8 Reports
Me Too

Verified for the Dodge Caliber

Water leaks from the headliner may be cause by damaged sun roof drain tubes.

32 Reports
Me Too

Verified for the Dodge Caliber

A no crank or no start condition may be the result of a theft system fault. Our technicians tell us that replacing the wireless control module should correct this issue.

16 Reports
Me Too

Verified for the Dodge Caliber
A weak or dead battery may me caused by an excess draw related to the cabin compartment node. Our technicians tell us that a software update is available to correct this issue.
2 Reports
Me Too

Verified for the Dodge Caliber
The ESP lamp may illuminate while driving due to a steering angle sensor fault. Our technicians tell us a software update is available to correct this issue.
1 Report
Me Too

Verified for the Dodge Caliber
Debris may enter the HVAC blower motor causing an abnormal blower motor noise. Our technicians tell us that installing a screen over the recirculation door will stop a reoccurrence of this issue.
1 Report
Me Too

Verified for the Dodge Caliber
The rear wiper may stop working and a fault code B2215 stored. Also, the A.C. power inverter may not work as it should. Our technicians tell us that a software update for the totally integrated power module will correct these issues.
4 Reports
Me Too

Verified for the Dodge Caliber
A squeak sound may be heard when applying and releasing the clutch pedal. Lubricating the clutch return spring and the clutch master cylinder pushrod ball socket is recommend to correct this issue.
1 Report
Me Too

Verified for the Dodge Caliber
Various engine and transmission fault code issues and driveability concerns have been addressed with software upgrades. Our technicians tell us that in some cases the engine and transmission control modules must be programed as a coordinated change. Driveability concerns may develop if only one module is reprogrammed.
2 Reports
Me Too

Verified for the Dodge Caliber
A whistle sound from the left side may be noted while driving. Modifications to the outside mirror assembly may be necessary to correct this issue.
1 Report
Me Too

Verified for the Dodge Caliber
A metallic rattle sound from the liftgate while driving over bumps may develop. Our technicians tell us that replacing the liftgate bumpers should correct this issue.
1 Report
Me Too

Verified for the Dodge Caliber
A high pitched tone may be heard from the engine compartment at temperatures below 0 degrees. The repair involves replacing the bypass valve and four o-rings on the back of the radiator.
1 Report
Me Too
Ask a Question