2002 Dodge Ram Van 1500 Q&A

2002 Dodge Ram Van 1500 Question: DIAGNOSTIC CODES

I HAVE HEARD YOU CAN OBTAIN DIAGNOSTICS CODE BY TURNING THE KEY ON AND OFF. CAN YOU TELL ME THE PROCEDURE? -
Answer 1
yes, if you cycle the key 3 times and leave the key on, then the light will flash out codes. it will not define the problem, just the system that has a failure. a scan tool is the real tool that is required as you need freeze frame data and data to help track down the failure. Roy -
Related Items:
The engine shuts down completely at randome times the digital odometer, flashes then reads "no bus" and the dials all read 0. After a few minutes all the dials return to their proper spots and the ...
repaired with po740 engine stumble at idle, is tcc engaged by bad tcc solenoid??
we changed the crankshaft position sensor and the cam shaft postion sensor the codestill reads p0320
After engine warms, van loses power. Can push on accelerator, but car will not accelerate. Also, will stutter and die at stops and red lights. Occasionally will backfire.Diagnostic revealed above ...
when i drive on the road for some distance it will start to missfire had engine changed diagnostic code shows that all cylinders misfires