Crank but No Start Condition and No Fuel Pressure on Mazda Navajo

If the engine cranks but does not start, it may be caused by a tripped inertia switch. Switch the key to "ON" and the fuel pump should be heard running for a second or two. Listen at the gas filler if necessary. The inertia switch is located on the firewall and can be tripped when the parking brake is set too hard and then released. The inertia switch should be reset, and will click when it is reset.

RepairPal Verified
Average mileage: (–)
4 model years affected: 1991, 1992, 1993, 1994
5 people reported this problem
1 person shared problem details
Was running great when I parked it but will not start now. Seems like it's not getting any fuel. Engine turns over good but will not start.
Related Items:
I just replaced fuel pump and found that there was wire shortage somewhere in my fuse panel. (h...
The O-ring seals in the AC couplings can develop leaks. The condenser can also crack and leak,...
My navajo won't start only clicks it will start only if you pop start the clutch,I have replace...
it revs up when i start it untill i put it in gear and start letting out on the cluch the only...
replaced the upper hose but still having over hot and no heat inside car

Related Content