The hood latch striker bolts may loosen and allow the hood to open unexpectedly while driving. Dealers will install new hood striker bolts with the proper torque free of charge to resolve the concern.
Chrysler Town & Country Recalls
If the ignition key unexpectedly moves to the OFF or ACCESSORY position, the engine will turn off. This will depower various safety systems including but not limited to airbags, power steering, and power braking. Loss of functionality of these systems may increase the risk of crash and/or injury in the event of a crash. The weight of extra items on the ignition key ring can be a contributing factor to this unexpected occurrence. Until this recall is completed customers are advised to remove all other items from the ignition key ring. Dealers will modify the ignition switch to correct this concern.
The vent window switch on the driver's door armrest may overheat. Dealers will replace the vent window switch with a revised version free of charge to resolve the problem.
On vehicles modified for wheelchair accessibility by Freedom Motors Incorporated, the rear axle may crack and fail. Dealers will replace the affected axles free of charge to resolve the problem.
The occupant restraint control module monitors vehicle occupant and crash data to determine which airbags to deploy when necessary. A software error may result in the airbags deploying from the opposite the side of impact (a left side impact would deploy the right side airbags and vice versa). This would leave the occupant at the point of impact with no protection, increasing the risk of injury. Dealers will reprogram the occupant restraint control module to correct this concern.
The incorrect software may have been installed in the occupant restraint control module (ORC). As a result, the airbags may not deploy as expected in the event of a crash. Improperly deployed airbags can increase the risk of personal injury. Dealers will inspect and replace the ORC module as necessary to correct this concern.
Certain vehicles may have been manufactured with a right side liftgate pinch sensor that does not function properly. As a result, increased force may be required in order to stop the power liftgate during its final closing stages. If the power liftgate were to close on an appendage, personal injury may result. Dealers will replace the right side liftgate pinch sensor to correct this concern. The Chrysler recall number is M17.
The right rear hub and bearing assembly may not have been fully machined. This could result in decreased durability. A failed hub assembly could cause the wheel to separate from the vehicle, increasing the risk of a crash. Dealers will replace the right rear hub assembly to correct this concern. The Chrysler recall number is M13.
667 vehicles equipped with a 3.6L engine are being recalled because a connecting rod bearing can fail due to debris inside the engine block. Connecting rod failure may lead to engine seizure, which can increase the risk of a crash. Dealers will replace the engine to correct this concern. The Chrysler recall number is L33.
Condensation from the AC (HVAC) system may leak from the drain grommet onto the occupant restraint control (ORC) module. This can lead to illumination of the airbag warning light and/or inadvertent airbag deployment. An inadvertent airbag deployment could result in injury and/or a vehicle crash. Dealers will replace the affected airbag module to correct this concern. This recall is expected to begin during August of 2011. The Chrysler recall number is L01.