Upon deployment the driver's front airbag inflator could rupture, increasing the risk of personal injury. Dealers will replace the driver's front airbag inflator to correct this concern. Note: this recall supersedes, in part, recall #14V-354.
The alternator can fail, causing loss of electrical power and possible engine stalling. Dealers will repair the vehicle free of charge (the repair procedure is not available as of the time of this writing).
The ignition key may stick between desired positions in the ignition key cylinder mechanism, and may move between positions while driving. This can cause the engine to shut off and electrical accessories to stop operating. Dealers will repair this concern free of charge (a repair procedure is still under development as of the time of this writing).
If the ignition key unexpectedly moves to the OFF or ACCESSORY position, the engine will turn off. This will depower various safety systems including but not limited to airbags, power steering, and power braking. Loss of functionality of these systems may increase the risk of crash and/or injury in the event of a crash. The weight of extra items on the ignition key ring can be a contributing factor to this unexpected occurrence. Until this recall is completed customers are advised to remove all other items from the ignition key ring. Dealers will modify the ignition switch to correct this concern.
This limited regional recall is for vehicles currently registered or first sold in Florida, Puerto Rico, Hawaii and the U.S. Virgin Islands, and equipped with Takata-brand air bag inflators. Upon deployment the driver and/or passenger airbag inflator could rupture, increasing the risk of personal injury. Honda dealers will replace the affected airbag inflator modules to correct this concern.
Certain All Wheel Drive (AWD) vehicles equipped with a ZF 8HP45 transmission are being recalled. In the affected vehicles, the transmission output shaft can break unexpectedly. This could result in loss of power to the drive wheels, increasing the risk of a crash. The vehicle could also unexpectedly roll away with the transmission shifter in the park position. Dealers will replace the transmission in affected vehicles to correct this concern.
522 vehicles equipped with a 2.4L engine are being recalled because the engine may have abrasive debris in the balance shaft bearings. The debris can result in premature wear and loss of engine oil pressure. As a result, the engine could stall unexpectedly or fail. Dealers will replace the engine balance shaft module to correct this concern.
The incorrect software may have been installed in the occupant restraint control module (ORC). As a result, the airbags may not deploy as expected in the event of a crash. Improperly deployed airbags can increase the risk of personal injury. Dealers will inspect and replace the ORC module as necessary to correct this concern.
The occupant restraint control module monitors vehicle occupant and crash data to determine which airbags to deploy when necessary. A software error may result in the airbags deploying from the opposite the side of impact (a left side impact would deploy the right side airbags and vice versa). This would leave the occupant at the point of impact with no protection, increasing the risk of injury. Dealers will reprogram the occupant restraint control module to correct this concern.
Active head restraints are designed to move forward and upward as necessary in the event of a rear end collision. These vehicles are being recalled because an internal fault in the occupant restraint control module could cause the active head restraints not to function as expected, increasing the risk of injury. Dealers will reprogram the Totally Integrated Power Module (TIPM) or replace the occupant restraint control module as necessary to correct this concern.