Headlight switches can fail, causing the headlights to intermittently stay in the on or off position. Repeatedly turning the switch on and off may temporarily fix the problem. Replacement of the switch is needed to resolve this issue.
2010 Chrysler Town & Country Problem Reports
RepairPal Verified 2010 Chrysler Town & Country Problem Reports
A failing head lamp switch can cause the head lamps and/or instrument cluster lighting to flicker or dim. The head lamp switch should have a noticeable click between each position; a "mushy" feel is a strong indication of a failing switch.
The front legs for the third row bench seat may not retract. Our technicians tells us a new parts kit and/or spring is available to correct this concern.
There have been reports of excess oil consumption due to oil burning in the combustion chamber. This can be occurring even without the traditional blue oil smoke noted from the tail pipe. In some cases this oil consumption is due to problems with the PCV system. It is recommend a complete inspection of the PVC system, including this oil baffle inside the valve cover, be performed if excess oil consumption is noted. According to the manufacturer, usage of 1quart of oil every 1,000 miles is acceptable.
A "tapping plate cage" on the driver side frame rail may cause a squeak or tick noise while driving, this is often misdiagnosed as a suspension problem. The tapping plate is a threaded plate which accepts one of the front sub-frame mounting bolts. The "cage" of the threaded plate may be touching the frame rail causing noise as the vehicle is driven. "Adjusting" the rear tab on the tapping plate cage so it no longer is touching the frame should eliminate this noise.
Excessive oil consumption—defined as more than one quart per 1,000 miles (on vehicles with less than 50,000 miles) or more than one quart per 750 miles (on vehicles with more than 50,000 miles)—is common. Common causes include exhaust valve guides, valve cover gaskets, camshaft plugs, camshaft seals, and crankshaft seal.
Intermittently, the key may not start the car or release from the ignition. If it is excessively worn, replace the key. If the new key doesn't work, replacing the lock cylinder including tumblers should correct this concern.
Shifting harshness and shuddering issues related to the operation of the automatic transmission have been addressed by factory service bulletins. The shuddering can feel like the vehicle is being driven over rumble strips.
A dirty throttle body may cause low engine idle speed or frequent stalling, as oily residue blocks air flow in the throttle when the throttle is closed. Throttle body cleaning may be necessary to correct this condition. Our technicians caution against spraying cleaner directly onto the throttle body as this may damage the throttle position sensor (TPS).