A rattle from the rear of the vehicle may indicate that the rear shock absorbers are defective. Updated shocks are available; however, careful inspection of all suspension components should be performed before any parts are replaced.
Problems for specific Chrysler Sebring years:
Car problem reports
Problem with your car? See what our experts say or submit your own.
Newest reported 2000 Chrysler Sebring problems
Just the dash lights went out about a month ago.
One or both windshield washer nozzles may plug or clog. There are revised washer nozzles available which are more resistant to plugging.
There have been reports of premature head gasket failure; an updated gasket design is available to correct this problem.
A whistle sound may be noted from the glove box area when the AC system is in the "fresh air" mode. Our technicians tell us that updating the HVAC control module software will correct this issue.
Sedan and Convertible
A click heard when turning the steering wheel may be solved by aligning the steering column or installing revised steering column parts as necessary. Installing the revised parts will require removal of the steering column from the vehicle.
Failure to use the correct automatic transmission fluid and follow the maintenance schedule can result in shifting problems.
Spark plug tube seals fail, causing the tubes to fill with engine oil and the engine to misfire. As a result, the engine may run poorly and fuel economy can suffer.
Sensor failure inside the distributor can cause intermittent stalling or a failure to start. In addition, the wires to the distributor are susceptible to internal damage, which can cause the same symptoms.
The automatic transmission can develop problems like erratic shifting, rough shifting, or delayed gear engagement. Repairs for many of these problems are outlined in service bulletins.
Corrosion on the door ajar switch can cause the door ajar warning light and dome light to work intermittently or not at all. A new switch (and possibly a new connector) will be needed to fix the issue.