1999 Chrysler Sebring Problem Reports

RepairPal Verified 1999 Chrysler Sebring Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

Convertible model
One or both windshield washer nozzles may plug or clog. There are revised washer nozzles available which are more resistant to plugging.

There have been reports of premature head gasket failure; an updated gasket design is available to correct this problem.

Failure to use the correct automatic transmission fluid and follow the maintenance schedule can result in shifting problems.

Spark plug tube seals fail, causing the tubes to fill with engine oil and the engine to misfire. As a result, the engine may run poorly and fuel economy can suffer.

Sensor failure inside the distributor can cause intermittent stalling or a failure to start. In addition, the wires to the distributor are susceptible to internal damage, which can cause the same symptoms.

A defective vehicle speed sensor can cause problems with the cruise control and speedometer operation, as well as erratic shifting. The connectors on the sensors are also susceptible to corrosion, which will create similar symptoms. Any of these problems can cause Check Engine Light illumination.

An engine Oil leak may develop at the cam sensor o-ring seal. Our technicians tell us this is often misdiagnosed as an external head gasket leak.

The automatic transmission can develop problems like erratic shifting, rough shifting, or delayed gear engagement. Repairs for many of these problems are outlined in service bulletins.

Corrosion on the door ajar switch can cause the door ajar warning light and dome light to work intermittently or not at all. A new switch (and possibly a new connector) will be needed to fix the issue.