» » »

Problems for specific Chrysler Pacifica years:

Car problem reports

Report A Problem

Problem with your car? See what our experts say or submit your own.

Newest reported 2006 Chrysler Pacifica problems

 

Verified for the Chrysler Pacifica

Carbon buildup on the valves may illuminate the Check Engine Light, indicating "Multiple Cylinder Misfires." The combustion chamber must be cleaned of carbon. There are updated valve spring retainers that will help prevent a recurrence.

21 Reports
Me Too

Verified for the Chrysler Pacifica

Static discharge and/or loose wire connections could cause problems with the front power seat memory, seat heaters, and adjustable pedals. Revised seat modules are available that resist the affects of static discharge.

24 Reports
Me Too

Verified for the Chrysler Pacifica

The engine may develop a ticking noise, often caused by a broken retaining pin on the rocker arm shaft. When the pin breaks, the shaft can spin blocking the oil passage the rocker arms (which causes the ticking noise). The rocker arm shafts, rocker arms, and pedestals (sold as a kit) are commonly replaced in order to correct this condition.

93 Reports
Me Too

Verified for the Chrysler Pacifica

Static discharge through the right (passenger) front door handle can result in a loss of functionality from the right front door switches, power mirrors, seat controls, and door locks. There is a revised door handle which is more static resistant. A new door module may be needed if the module does not reset properly.

10 Reports
Me Too

Verified for the Chrysler Pacifica
If the engine is hard to start or if it cranks but does not start in freezing temperatures, a new idle air control (IAC) motor and software update to the Powertrain Control Module (PCM) may be needed.
3 Reports
Me Too

Verified for the Chrysler Pacifica
If the cup holder lid will not stay closed, a lid spring was released so replacing the entire assembly should not be necessary.
8 Reports
Me Too

Verified for the Chrysler Pacifica
If the moon roof makes a thumping noise moving from the closed to the vent position, using some lubricant (available from Dodge) on the moon roof seal can solve the problem.
3 Reports
Me Too
Ask a Question