1999 Chrysler 300M Questions

Unanswered 1999 Chrysler 300M Questions

Ask a Question
View:RecentAnsweredUnanswered
1999 300m Stalling issue. Codes read: p0700 p0740 p1781 p0354 Let me explain what is happening. This problem usually occurs while on a highway or interstate and then usually after driving for longer than 20 mi...
I have a 2000 300m that will not start. I shut it off and then tried to start it after work and it wouldn't start. It fired once and then wouldn't fire again. Cranks but no fire. Has spark, changed plugs, seems to...
My Chrysler 300m 1999 is experiencing a power distribution problem and my wiring harness is gone out. No one in the country has the part I need in stock, so I'm asking is there another car with a similar harness that'...
Put my car on the machine it said something about the transmission and the gears being open. Noe none of my windows roll up my ac when cut on makes me likgts flicker. My car want say cranked up.my gears no longer swit...
I started the car and drove two blocks, then parked for 45 minuets.When i tried to start my car, it will crank but not start. I tried a hot shot that didn't work. I was told it was the crankshaft position sensor. That...
I was driving down the road and my belts snapped. Had music up and did not hear it. Continued to drive until it died due to the alternator not running (because belts snapped) and car was pulling off the battery. I tri...
wife put gas in the car and came home. next morning went to start the car and it turned over but won't fire. checked fire at spark plug, nothing. this is the 1st time it has happened and no codes were displayed.
it has an exhaust leak , & wanting to know how much.
I have replaced both cam and crank sensor, because of po340 code. Has new battery, also. Car died while turning right. I can hear the fuel pump humm for about 1 second when I turn the key.
Do I need to replace line all the way back to the tank or can it be spliced at the frame? Does the tank need to be removed?
Do I need to replace the fuel all the way back to the tank or can the line be spliced down near the frame? Will the fuel tank need to be removed?