2008 Chrysler 300 Problems
RepairPal has identified the most common problems with the 2008 Chrysler 300 as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.Refine by vehicle
If you experience rough shift and/or shuddering during gear shifting, software updates to the powertrain control and transmission control modules (PCM and TCM) are available which may address these problems. On higher mileage vehicles, a mechanical failure may exhibit similar symptoms. Proper diagnoses should be performed before any repairs or software upgrades are attempted.
Software updates are available which may correct various electrical problems with the interior features and lighting.
There may be an intermittent three- to five-second delay between when you turn the key and when the engine actually cranks. If the Check Engine Light illuminates, the brake switch should be inspected and the PCM may need updated software.
Rear differential and axle seals are prone to repeated leaks.
Carbon buildup on the valves may illuminate the Check Engine Light, indicating "Multiple Cylinder Misfires." The combustion chamber must be cleaned of carbon. There are updated valve spring retainers that will help prevent a recurrence.
A honk, hiss, or groan noise may be noted from the steering during low speed parking lot maneuvers. Our technicians tell us that replacing the power steering return hose may correct this concern, If it does not the steering rack and pinion may require replacement.
A squeak may be heard from the base of the steering column while turning the steering wheel. The noise may be coming from the lower seal on the steering shaft. Lubrication of the seal will commonly correct this problem.
A transmission fluid leak can develop at the electrical connector on the automatic transmission. Replacement of the electrical connector may be necessary to correct the leak.