1995 Chevrolet Monte Carlo Problems
RepairPal has identified the most common problems with the 1995 Chevrolet Monte Carlo based on complaints from actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.
The high pressure power steering hose will commonly leak fluid; it should be replaced.
The intake manifold gasket may develop and external engine oil or coolant leak. In some cases, an internal coolant leak may occur causing coolant to mix with the engine oil. Our technicians tell us that operating the engine with a coolant/oil mix can result in internal engine damage. Replacing the intake manifold gasket should correct these leaks.
An engine oil leak may develop from the rear of the engine. This is commonly caused by a failed oil pump drive o-ring seal. The leaking o-ring should be replaced to correct this concern.
One or more of the power windows may stop working due to a failed window switch. Failed switches will require replacement.
One or more power windows may stop working due to a failed window motor or switch. Proper diagnoses will be necessary to determine the exact cause.
An automatic transmission fluid leak may develop from the rubber section of a transmission cooler line. In some cases the rubber section of hose can be replaced. In others, the complete cooler line must be replaced to correct this type of leak.
The spark plugs should be replaced every 30,000 miles and the spark plug boots should be checked for hot spots and cracks.
The upper intake manifold gasket and/or a PCV vacuum lines/hoses can develop vacuum leaks with age. This type of leak can result in a higher that normal or rough idle.
An engine oil leak may develop from the oil pump drive O-ring. This can often be confused with an intake manifold gasket leak. Careful inspection is required to determine the exact cause of the leak. Replacement of the failed 0-ring will commonly correct this concern.