The exhaust gas recirculation (EGR) tube which connects the EGR valve to the intake manifold may develop an engine vacuum leak, causing the Check Engine Light to illuminate with code P0171 and/or P0174 stored.
Problems for specific Chevrolet Lumina years:
Car problem reports
Problem with your car? See what our experts say or submit your own.
Newest reported 1998 Chevrolet Lumina problems
The intake manifold gasket may develop and external engine oil or coolant leak. In some cases, an internal coolant leak may occur causing coolant to mix with the engine oil. Our technicians tell us that operating the engine with a coolant/oil mix can result in internal engine damage. Replacing the intake manifold gasket should correct these leaks.
The crankshaft position sensor, ignition module, and/or powertrain control module (PCM) may fail resulting in illumination of the Check Engine Light with ignition system related fault codes stored in the PCM. Patience is necessary when dealing with this specific situation as normal diagnostic procedures are not effective. In many cases, the best option is to replace parts, one at a time until the fault is corrected.
An engine oil leak may develop from the rear of the engine. This is commonly caused by a failed oil pump drive o-ring seal. The leaking o-ring should be replaced to correct this concern.
The serpentine belt tensioner pulley may wear out. Our technicians tell us that in order to get a new pulley from General Motors you must purchase a complete belt tensioner assembly.
One or more of the power windows may stop working due to a failed window switch. Failed switches will require replacement.
The fuel pump may fail causing engine to stall and not restart.
The rubber section of an automatic transmission cooler line may develop a fluid leak . In some cases the leaking section of hose can be replaced. In others, the complete cooler line must be replaced to correct this concern.
The high pressure power steering hose will commonly leak fluid; it should be replaced.
The intake manifold gasket may develop external engine oil leak. The manifold gasket will need to be replaced to correct this issue.