2007 Chevrolet Express 2500 Problem Reports

Newest 2007 Chevrolet Express 2500 Problem Reports

Report A Problem

Vehicles equipped whit a 4 speed automatic transmission may develop a harsh 1-2 shift and/or illumination of the Check Engine Light with code P1870 stored. This can be caused by wear of the bore for the TCC isolator and regulator valves in the valve body. This condition does not commonly occur until the transmission reaches normal operating temperature. If the valve body is worn, replacement will be necessary to correct this concern.

The tail light wiring harness in the cargo area is not protected very well. As a result it may become damaged due to normal wear a tear. This damage can causing some or all of the rear lights to stop working.

One or both secondary air injection check valves may become restricted causing poor air flow resulting in illumination of the Check Engine Light. It is often recommend to replace both check valves even if a fault code is set for only one bank of cylinders. Replacing only one valve may result in a return trip to the repair shop.

It is common for the fuel level sensor in the fuel tank read the fuel level incorrectly. The sensor must be replaced to correct the condition. Our technicians recommend having the complete fuel pump module replaced on high mileage vehicles.

Various electrical components under the front carpet/rubber mat may become damaged if excess water is used to clean the rear cargo area.