» » »

Acura Q&A

Ask Your Question

2006 Acura RSX Question: Check Engine Light on, DTC code P1077



mashina2010, Asheville, NC, February 18, 2010, 20:31

ok so i got a 06 base rsx and have a P1077 code on it, no mattter what ive done the code is still there, i replaced the vtec solenoid already, the actuator, the intake manifold, and the ecm, and no matter what i replace the code is still there, can anyone tell me whats going on, or at least what i need to replace, cause i think the dealer knows whats wrong, they just wont tell me. need help asap.

1 Answer
Flag This
  • Answer #1

    February 19, 2010, 23:17

    There is a bulletin about this issue, however it recommends replacing the solenoid, is this the same part you replaced?. You should go talk to an Acura dealer and see if they have any further information about this problem.

    Applies To: 2004–05 RSX – ALL
    2006 RSX – From VIN JH4DC5...6S000001 thru JH4DC5...6S000342
    The MIL is on with DTC P1077 [intake manifold runner
    control (IMRC) / intake manifold tuning (IMT) system
    malfunction (low rpm)].
    Internal sticking of the IMT (IMRC) solenoid valve.
    Replace the IMT (IMRC) solenoid valve.
    Valve Assembly: P/N 36163-PND-A01
    In warranty: The normal warranty applies.
    Out of warranty: Any repair performed after warranty
    expiration may be eligible for goodwill consideration by
    the District Parts and Service Manager or your Zone
    Office. You must request consideration, and get a
    decision, before starting work.

    Flag This
  • Reply

    mashina2010, February 20, 2010, 14:22

    yes i already replace the imrc solenoid valve, bought a new one from the dealer

    Flag This