» » »

Isuzu Q&A

Ask Your Question

1996 Isuzu Hombre Question: changing starter

 

Question

Visitor, Glendale, AZ, April 14, 2011, 09:55

can't get starter out. removed tranny brace and all other brackets. won't slide past engine mount. what's the deal here?

1 Answer
Flag This
  • Answer #1

    ZeeTech April 14, 2011, 17:48
    Profile_thumbnail
     Master

    This is from the shop manual, I hope this will help:

    1. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
    2. Disconnect battery ground.
    3. Disconnect front exhaust pipe.
    4. Disconnect brace rod from front bell housing.
    5. Disconnect electrical wires at starter solenoid.
    6. Remove attaching bracket to engine mount bolt.
    7. Remove starter bolts and shims, if equipped.
    8. Remove bracket from starter, if necessary.
    9. Reverse procedure to install. Torque starter and bracket to engine bolts to 33 ft. lbs.
    10. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.

    Zee

    Reply
    Flag This