2011 Toyota Matrix Repair and Maintenance Costs
A guide to repairs, service, and maintenance costs for your 2011 Toyota Matrix
Never overpay. Check prices with our estimator
Ask a mechanic in our community
2011 Toyota Matrix ProblemsExcessive Oil Consumption
Drivers of the Toyota Matrix may notice excessive oil consumption between oil changes, even to the extent of the engine oil warning light displayed on the multi-function display.
This issue is known to be caused by infrequent oil changes causing engine sludge, or worn piston rings.
The engine should be cleaned of oil sludge, and if oil consumption remains excessive, the engine may need new piston rings, or other internal components replaced.
To avoid this issue, change the engine oil and filter every 3,000 miles, and ensure the proper grade of oil is used.
The head gasket may fail due to a defect in manufacturing of the cylinder block.
On this vehicle, the head bolts are known to pull the threads out of the engine block, allowing the head to slightly lift, and causing head gasket failure. Symptoms may include:
- White smoke from exhaust
- Rough running conditions and/or inability to start or idle
- White or cream colored oil on dipstick
- Check engine light
- OBD Trouble Codes P2181, P0300
When the head gasket fails, the bolt holes for the head bolts must be repaired before the cylinder head can be remounted.
This issue is not always preventable, but to help avoid it, never run the engine if the engine temperature is ever above the normal range.
2011 Toyota Matrix QuestionsCheck engine light just came on. What is the problem? (1 answer)
There is a major recall due to airbags. And I need to know if mine is one.
2011 Toyota Matrix RecallsPassenger Frontal Air Bag Inflator Ruptures On Deployment
The passenger frontal air bag inflator may rupture on deployment, causing metal fragments to come through the air bag and injure occupants. Dealers will replace the passenger frontal air bag inflator or in some cases replace the air bag assembly free of charge to resolve the concern.
The driver's side power window master switch may lack enough proper lubricant to protect the sliding electrical contacts of the switch. This can cause a short circuit of the switch, leading to overheating and melting of the switch. Dealers will inspect the switches and apply lubricant to them if no abnormality is found. If a problem is found, the switch circuit board will be replaced. These inspections and repairs will be performed free of charge to resolve the concern.