2013 Toyota Corolla Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2013 Toyota Corolla
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
2013 Toyota Corolla ProblemsCheck Engine Light Due to EVAP System Fault
The Check Engine Light may illuminate due to an evaporative emission (EVAP) system fault. Our technicians tell us these EVAP system faults can be difficult to diagnose but it is not uncommon to find a failed charcoal canister or a loose or worn gas cap.
If the engine will not crank over, the most common problem is the starter. These will tend to go out at about 100,00-125,000 miles. Sometimes it is only the starter solenoid, but often the complete starter (including solenoid) needs to be replaced.
The last 2 times it has rained my driver's side floor board has been full of water. Took it to the shop and determined the drain for the sun roof was clogged.
2013 Toyota Corolla QuestionsWhat is causing my radio to come on and the key is not in the ignition? (1 answer)
My issue is my radio comes on without the key in the switch , this started 10/15/2016. The only way to cut the radio off is with the on/off button. If I don't cut it off the radio will continue to play. This is so weard to me. I want to know is there any recalls or anything on this.
the wiper fluid is leaking due to a cracked reservoir and the pump is whining and is not spraying
my tire pressure light came on this morning on way to work, will everything be ok till i can get it checked after work? and, is it ok to drive it?
2013 Toyota Corolla RecallsVehicles With Added Seat Accessories May Not Have Properly Functioning Restraint Systems
Vehicles that have had accessories added to the seats such as seat heaters, seat covers or DVD headrests may not have the occupant sensor system of the passenger seat calibrated properly. This can affect passenger air bag operation in a crash. Dealers will test the sensitivity of the occupant detection sensors and recalibrate them as necessary free of charge to resolve the concern.