2000 Toyota Camry Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2000 Toyota Camry
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
2000 Toyota Camry ProblemsRear Light Wiring Harness May Break
The rear light wiring harness can break where it attaches to the trunk hinge. As a result, the reverse lights or the shift indicator may not work and the rear bulb fault indicator may stay on constantly. The harness can be repaired and does not have to be replaced.
The valve cover gaskets have a tendency to leak oil, especially the one near the firewall.
At higher mileages, (125,000-150,000) the automatic transmission may not shift correctly. This can be caused by the throttle position sensor being out of adjustment or a shift solenoid needing to be replaced. Typically the transmission does not need to be completely overhauled.
2000 Toyota Camry Questionswhere is the relay that controls the fuel pump i cant seem to find it inside the relay box does it have a different name like cir opn (2 answers)
I have a 2000 Toyota Camry V6 with 76K miles. A week ago, I took my car to the shop to have the battery tested because after not driving it for 5 days during the huge snow storm, I needed to have it jumped. They tested the battery and said it was fine .. it was just the 5 days plus the extreme co...
2000 Toyota Camry RecallsToyota Recalls 2001 Camrys for Deformed Accelerator Cable Housing
Toyota is recalling certain 2001 Camry models equipped with cruise control and V6 engines because the accelerator cable housing could be deformed at the cruise control actuator-to-throttle body connection. This may cause the accelerator inner-cable to wear and eventually break, allowing the throttle to return to idle or remain in its most recent position, regardless of pedal operation, which increases the risk of a crash. Dealers will replace the accelerator cable.
Toyota is recalling 2000 Avalon, Camry, and Solara models because an improper heat treatment may cause the rear axle to be weaker in some areas. After extended use of the vehicle, the rear axle shafts could fail or break. Dealers will inspect and replace the rear axle hub assemblies.