2011 Suzuki SX4 Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2011 Suzuki SX4
2011 Suzuki SX4 Problems
A condition may develop where the accelerator pedal sticks and is not smooth. This can be caused by carbon build up on the throttle shaft or throttle body cleaner was used which removed the special coating on the throttle shaft. Our technicians tell us that if this is the case the throttle body should be replaced.
2011 Suzuki SX4 Recalls
These vehicles are being recalled because the transmission gear selector can be moved out of the "Park" position without depressing the brake pedal. This could cause the vehicle to roll unexpectedly, increasing the risk of a crash. Dealers will replace the shift selector in affected vehicles to correct the concern.
The passenger seat contains a sensor which helps determine if the passenger front airbag should deploy or not in the event of a crash. It is called the occupant classification system (OCS), and is a mat that is part of the passenger seat cushion. These vehicles are being recalled because the OCS may fail due to the repeated flexing of the mat from general use of the seat. As a result, in the event of a crash the passenger airbag may deploy when it should not, increasing the risk of personal injury. Dealers will replace the front passenger seat cushion (which includes the OCS sensor mat) to correct this concern.
As a result of a failed tensioner, the accessory drive belt may slip or come off completely. This will result in hard steering and illumination of the charging system warning light. If the vehicle is driven in this condition, the engine may stall as a result of a discharged battery and the engine temperature warning light may illuminate. Loss of vehicle control due to hard steering or engine stall can increase the risk of a crash. Dealers will replace the tensioner with an improved part to correct this concern. This recall is to begin on February 16, 2011. The Suzuki recall number is SM.