2005 Nissan Sentra Repair and Maintenance

A guide to problems, costs, maintenance and repair for your 2005 Nissan Sentra

No_car
Get a Repair Estimate
Guaranteed by certified locations nationwide. Learn more
Get a Repair Estimate For Your 2005 Nissan Sentra
RepairPal estimates are guaranteed at over 1,700 quality certified locations nationwide. Learn more

2005 Nissan Sentra Problems

Nissan fuel pump recall

Nissan issued a recall on the fuel pump for premature failure. There was an owner notification program and labels were placed on the fuel pump access panel and next to the AC charge label in the engine compartment.

Nissian Crankshaft and Camshaft Sensor Recall

The engine may stall at times due to a failed crankshaft position sensor and/or camshaft position sensor, These sensors can fail intermittently as they warm with the engine. Sensors on certain models have been recalled by Nissan and will be replaced as necessary. Please visit our recall section for this model to see if your vehicle is covered by this recall.

Check Engine Light Due to Failure of Catalytic Converter Closest to Cylinder Head

The catalytic converter closest to the cylinder head can fail causing illumination of the Check Engine Light. Prompt repair of this problem is recommended because the catalyst material can be sucked into the engine and cause internal damage.

See More Problems (10)

2005 Nissan Sentra Recalls

Front Passenger Air Bag Defect

The passenger side air bag inflator may rupture if deployed in a crash. This can cause metal fragments to injure passengers. Dealers will replace the passenger side air bag inflator free of charge to resolve the problem.

Front Airbag Inflator Module

This limited regional recall is for vehicles currently registered or first sold in southern Florida, along the Gulf Coast, Puerto Rico, Hawaii, the U.S. Virgin Islands, Guam, Saipan and American Samoa. Upon deployment the passenger airbag inflator could rupture, increasing the risk of personal injury. Dealers will replace the passenger side air bag inflator to correct this concern.

Overheating of Crankshaft Position Sensor May Cause Vehicle to Shut Down

On certain passenger vehicles equipped with a 2.5L engineThe crankshaft position sensor can overheat causing a brief interrupion in the signal output. If the interupption of the signal is so brief that the ECM Electronic Control Module dose not have time to diagnose the condition, the vehicle may shut off creating the risk of an accident. The dealer will reprogram the ECM free of charge. The Nissan recall # is R0606

See More Recalls (4)