2005 Nissan Murano Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2005 Nissan Murano
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
Our experts translate recalls into plain English
2005 Nissan Murano ProblemsFailing Engine Mounts Will Cause Thumping in Floor
A thumping heard and felt in the floor is often caused by failing engine mounts. A failing mount allows too much movement of the engine, and will require replacement.
A damaged or broken seat adjuster assembly on the seat bottom can cause the seat to rock back and forth and possibly squeak. It can also cause the seat to not adjust forward or backward, or up and down.
A creaking or clicking heard while the vehicle is accelerating can be caused by dirt and corrosion build up between the splines of the front hubs and CV axle shafts.A creaking or clicking heard while the vehicle is accelerating can be caused by dirt and corrosion build up between the splines of the front hubs and CV axle shafts. Removing, cleaning, and applying a light coat of grease on the axle shaft splines will commonly correct this concern.
2005 Nissan Murano QuestionsAir bag won't go off is that a recall if so who do I call to get it fixed it have six recalls (1 answer)
with in 24 hours it looses the coolent and is blowing hot air again. What next
My car has been make sound from the bottom when I drive, back up, turn the steering wheel
2005 Nissan Murano RecallsNissan Recalls 2003–2007 Muranos Due to Defective Intake Air Ducts
Nissan is recalling 2003–2007 Murano models because the intake air ducts may separate from the resonator with engine movement. This may cause the engine to stall, increasing the risk of a crash. Dealers will inspect and repair/replace the components free of charge.
On certain sport utility vehicles the steering may become locked with the key in the off position but not in park. If the key is turned to off with the transmission not in park the wheel may lock when turned to the right. Dealer will inspect and replace lock assembly free of charge. The Nissan recall # is R0614
In certain types of frontal crashes, the belt portion of the rear outboard seat belt may contact the rear seat back hinge. The belt can be cut by the sharp edge of the hinge. If the belt were to completely separate, it can increase the risk of injury to the seat occupant. Dealers will install protectors over the affected belt portion of the rear belts.