2000 Nissan Altima Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2000 Nissan Altima
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
2000 Nissan Altima ProblemsEngine May Stall Due to Failed Crankshaft and/or Camshaft Sensor
The engine may stall at times due to a failed crankshaft position sensor and/or camshaft position sensor, These sensors can fail intermittently as they warm with the engine. Sensors on certain models have been recalled by Nissan and will be replaced as necessary. Please visit our recall section for this model to see if your vehicle is covered by this recall.
from a cold start air conditioning works fine and will continue to work fine as long as engine is running and air conditioning stays on, drove 200 miles and air blew cold entire time. Stopped to get a drink turning off car. Engine restarted but Air conditioning compressor would not come back on. When engine completely cooled and air system stabilized air compressor came back on and air was cold again. This situation was repeated dozens of ti...
The engine mount on the right side can wear prematurely and cause excessive engine movement.
2000 Nissan Altima QuestionsAC blows cold then hot. Replaced Relay and still having the same issue. (1 answer)
Pretty sure it's not the compressor and all belts are fine.
2000 Nissan Altima RecallsNissan Recalls Firestone Tires on 2000-2001 Altimas
Nissan is recalling vehicles equipped with Firestone Firehawk GTA-02, size P205/55r16 89H tires. With increasing mileage, the tires may develop a crack in the shoulder area, which may lead to exposure of the belt edge. If the belt edge separates, a loss of tire pressure may occur. Bridgestone/Firestone will replace the tires that were installed as original equipment on these vehicles.