2011 Mercury Milan Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2011 Mercury Milan
Verified by mechanics, reported by drivers like you
Never overpay. Check prices with our estimator
2011 Mercury Milan Problems
The automatic transmission may develop shifting concerns. On lower mileage vehicles, upgrading the software in the powertrain control module (PCM) and the transmission control module (TCM) may correct the problem. As the mileage increases, internal transmission damage can occur. Repairs could involve replacement of the valve body or a complete transmission rebuild. Whenever major transmission repairs are made, it is important to be sure the PCM and the TCM have the latest software updates to help prevent these issues from reoccurring.
Squeaks and creaks heard while driving over bumps and turning can be caused be a couple common sources and should be carefully diagnosed. Possible weld issues on the lower control arms can cause the noise concerns and require repair kits for the lower control arms from Ford. A jounce bumper (bump stop) rubbing against dry strut plate can cause an abrasion noise from the strut area. In this case the strut assembly should be disassembled to lubricate the jounce bumper and then reinstalled.
Power steering fluid may leak at the power steering pump, line, and/or steering rack. The lines may not be clamped tightly enough, causing a leak. Add new clamps and seals to the power steering line to the pump and to the steering rack.
2011 Mercury Milan Recalls
The steering motor sensor may fail, resulting in loss of power steering assist from the electric power steering system. Dealers will check the power steering control module (PSCM) for any trouble codes and replace the steering gear for vehicles that have codes relevant to the concern stored. If no codes are found, dealers will update the PSCM software free of charge to resolve the concern.
Ford accessory floor mats may interfere with accelerator pedal operation. Dealers will install replacement mats, free of charge to resolve the concern.
On vehicles equipped with 17-inch steel wheels, one or more wheel studs may break. If this were to occur, a vibration could develop and the wheel could separate from the vehicle, increasing the risk of a crash. To correct this concern, dealers will inspect the rear brake discs and replace them as necessary. Additionally, the wheel lug nuts will be replaced on all four wheels. The Ford recall number is 11S23.