2007 Mercedes-Benz E320 BLUETEC Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2007 Mercedes-Benz E320 BLUETEC
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
2007 Mercedes-Benz E320 BLUETEC ProblemsSRS Light Due to Water Damage on Passenger Seat Weight Sensor
Water can damage the weight sensor in the front, passenger seat, causing the SRS (airbag) light to illuminate. There is an electrical component in the seat cushion susceptible to fluid damage. Any spills should be dried up immediately in order to try and prevent damage to the sensor.
The brakes may begin to squeak at about the 50 percent wear point. This is due to the size and material used for the brake pads and rotors. The brake rotor surfaces become uneven, causing a lip to form at the outer edge. This will generally require replacement of the rotors when the pads are worn (pad life varies depending on driving style and terrain).
It is not uncommon to encounter premature failure of the anti-lock brake system (ABS) modulator assembly due to dirty brake fluid. Our technicians recommend flushing the brake fluid every two years in order to help prevent this problem.
2007 Mercedes-Benz E320 BLUETEC QuestionsI have e 280 diesel. Some times the gear shifting does not take place. (1 answer)
The gear shifts from N to D happens with a jerk and while driving the gear automatic gear shifting does not take place. The engine runs at high rpm. Then when I switch off and restart, the problem goes away.
This problem happens sometimes.
Restarting the engine seems to reset the sensor.
Was recently rear-ended. Got car fixed. Report there was a faint oil smoke smell and now the car goes into a type of limp mode when you accelerate to aggressively. Engine light is on. How can I prove the damage was caused by the rear end collision?
2007 Mercedes-Benz E320 BLUETEC RecallsDiesel Engine Crankshaft Sensor Failure Causes Engine Stall, No Start
The Diesel engine may stall and not restart due to a faulty crankshaft sensor. Dealers will replace the sensor free of charge to correct the problem.