2013 Mazda Mazda3 Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2013 Mazda Mazda3
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
2013 Mazda Mazda3 ProblemsCheck Engine Light/Trouble Code Due to Stuck Open Thermostat
Some vehicles may experience Check Engine Light illumination with a trouble code indicating the thermostat is stuck open. The thermostat will need to be replaced with a modified one and there is a software update for the Powertrain Control Module (PCM).
A vibration felt at 55 mph may not be a tire problem. Mazda has revised motor mounts available which may help remedy this problem.
The rear brakes can squeak because the rear brake pad may be contacting the brake rotor. A burr on the backing plate of the brake pad can prevent the pad from seating in the bracket properly causing the contact with the rotor. The backing plate and the pad support hardware can be deburred in the contact areas. Mazda has also released revised brake pads.
2013 Mazda Mazda3 QuestionsNO AIR . BLOWER WORKS .FREEON IS GOOD (1 answer)
CLUCH DOSINT ENGAGE
No lights and No codes, as per dealer 3K miles, also had fly by wire failure 2 times again intermittent. Also have had Dealer is saying never heard of any problem. Has anybody out heard of issues like this? Also have a jerking going downhill with no pressure on gas.
Last week I bought a brand new Mazda3 Hatchback. Only 6 days later the check engine light went on. I immediately brought it in to the dealer. When they started it to take into the service bay, the engine sounded horrid.
Long story short, they ran the computer and at least 5 codes poppe...
2013 Mazda Mazda3 RecallsLift Gate Falls Unexpectedly
The rear lift gate support struts may corrode and fail, and the lift gate may fall from the open position, or not stay open as expected. Dealers will replace the lift gate supports free of charge to resolve the concern.