1992 Mazda B2600 Repair and Maintenance

A guide to problems, costs, maintenance and repair for your 1992 Mazda B2600

1992 Mazda B2600
$710 to $1,104
1992 Mazda B2600
$174 to $284
1992 Mazda B2600
$467 to $653
1992 Mazda B2600
$110 to $140
1992 Mazda B2600
$358 to $611

Related Content

If the engine cranks but won't start, the fault may be internal to the distributor. Diagnosis will show no spark and trouble codes for the crankshaft position sensor (CKP) or the camshaft position sensor (CMP). Our technicians recommend replacement of the complete distributor assembly if these conditions occur.

If the automatic transmission shifts in and out of overdrive while cruising, it may be from a coolant thermostat that is stuck open. The engine must reach full operating temperature for the overdrive to engage properly. If possible, check to see the engine is running at full operating temperature while cruising.

If the Anti-lock Brake System (ABS) Light is flashing, the "Room" fuse may be missing or open (blown). Replace the fuse if needed and check the light again for flashing. If the fuse pops again, further diagnosis will be needed. If the light is not flashing, and on continuously, that means the system malfunction that needs ABS System diagnosis.

See More Problems 3

Truck will run once in a while for about 10 to 15 minutes and dies and will not start. It has spark an the injectors are working fine. Replaced everything I can think of. Any ideas would be great.

Do I have to remove the whole grille and if so how is the grille connected at the bumper?

Using a spray bottle, as long as I spray gas into the throttle body it runs fine. I put light on the injector powers and when they light up it try's to run. Help!

See More Questions 14

THE STEEL SPOKED WHEEL ASSEMBLIES INSTALLED AS STANDARD EQUIPMENT OR OFFERED AS AN OPTION ON THESE VEHICLES WERE IMPROPERLY WELDED DURING ASSEMBLY OF THE WHEEL RIM TO DISK, WHICH CAN CAUSE CRACKS IN THE WHEEL.

See More Recalls 1