2010 Lexus LS600h Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2010 Lexus LS600h
2010 Lexus LS600h ProblemsClicking/Knocking Sound From the Brake Actuator
A clicking or knocking type sound may be noted from the brake actuator when applying the brakes lightly, or if the brake pedal is pressed while the vehicle is stopped. Our technicians tell us a revised brake actuator is available to correct this concern.
The supplemental restraint system (SRS) warning light may illuminate with code B1861 and/or B1866 stored. Our technicians tell us that replacing a section of wiring harness behind the dashboard may be necessary to correct this concern.
2010 Lexus LS600h RecallsPotential Fuel Leak
Due to the remnants of anti-corrosion plating, a fuel leak may develop from where the fuel pressure sensor is attached to the fuel delivery pipe. Any fuel leak always increases the risk of a fire. Dealers will clean and reseal the area of the fuel pressure sensor to correct this concern.
A programming change to the variable gear ratio steering (VGRS) system can cause improper activation of the steering system protection logic, which is designed to protect the steering system when larger than normal inputs are applied when the wheel is fully turned. Improper activation of the protection system can cause the steering wheel to become off centered up to 90 degrees. This can happen if the steering wheel is fully turned and then quickly turned back to center. If the steering wheel unexpectedly becomes off center while driving, the risk of a crash is increased. Dealers will replace the steering control ECU free of charge. The recall began on July 12, 2010.