1993 Lexus ES300 Repair and Maintenance

A guide to problems, costs, maintenance and repair for your 1993 Lexus ES300

1993 Lexus ES300 Problems

The Check Engine Light may illuminate because a component of the oxygen sensor stops working. As a result the engine computer is unable to determine the proper ratio of air to fuel for the engine. Replacing the failed oxygen sensor should correct this concern.

Intermittent failure of a purge control valve in the evaporative emission system can cause the Check Engine Light to illuminate. A failed valve should be replaced to correct this problem.

 

On higher mileage vehicles, an engine misfire may develop and/or the Check Engine Light may illuminate due to a failed ignition coil. It is not uncommon to replace all the coils when the first one fails in order to prevent return trips to the repair shop.

See more problems 6

1993 Lexus ES300 Questions

what could be the problem .

Do not know everything seems to run fine. Motor revs when turning at a stop and when first putting into reverse. Do you have any ideas where to start. Is it a vacuum leak?

See more questions 52

1993 Lexus ES300 Reviews

I have two Lexus ES 300. 93 ES 300- had approximately 260K miles. on it and runs very strong. '96 ES 300 - Runs like silk. This car rides and drive very well. No problems with this car at all. Its waiting on the next adventure.

this car has been through it all and has never given me any serious problems (She had 185000 miles when i bought her and now she is over 212000) the ones i do have are simple enough bulb in dash needs to be replaced radiator needed to be changed 30 min job heat could be hotter but it does great as long as you are moving and air intake hose cracked a 3 min repalacement job ai...

See more reviews 2