1999 Land Rover Range Rover Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 1999 Land Rover Range Rover
1999 Land Rover Range Rover Problems
A pulsation may be noted upon brake application. This condition is commonly caused by warped brake rotors. Our technicians recommend inspecting both front and rear brake rotors when this condition occurs. Brake pads should be replaced along with any warped rotors to correct this condition.
A chirping type noise may be noted from the engine area, mostly at idle. This type of noise is generally caused by a faulty drive belt idler pulley. Our technicians tell us a revised pulley is available to correct this concern. Chirping Type Noise From Engine at Idle
In severe wet conditions, water may enter the anti-lock brake system (ABS) modulator electrical connector resulting in corrosion and illumination of the ABS warning light. Our technicians tell us revised modulator ground leads are available to better seal the connector. If corrosion is found in the electrical connector the connector will need to be repaired as necessary and the new ground leads installed.
1999 Land Rover Range Rover Questions
Sometime when I push on the brakes the pedal stops at midway...other times I have to push it almost to the floor. When the pedal stops midway the longer I have my foot on the pedal it will eventually go all the way to the floor. Cause and cure?
I have a 99 Range rover. I'm seriously considering purchasing a chunkier tire for the truck. Like general tire grabber or nitto terra grappler. They have thicker treading. My concern is if go up a size(current tire is 255/55-18) in height will that have a negative effect with the tire touchin...
I just purchased a used 99 Range Rover. Im not crazy about the EAS on it. I like my Suv to have some height.
Would it be wise to invest in spring coils? And if so would it lead any errors/problems with system. Basically what are pros and cons of EAS or Coil spring susp.
Thanks for any advise!