2008 Land Rover LR2 Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2008 Land Rover LR2
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
2008 Land Rover LR2 ProblemsThe Engine May Idle Poorly After a Cold Start
The engine may idle poorly after a cold start, with fault codes P050B, P050E, and P061A stored in the engine control module (ECM). Our technicians tell us updated software is available for the ECM to correct this concern.
The adaptive lighting system may stop functioning along with illumination of the warning light. Our technicians tell us this can be caused if the system has lost the position of a stepper motor. A software update for the lighting system control module to correct this concern.
The parking brake may not hold because the cable is out of adjustment. Our technicians tell us that Adjusting the cable and burnishing the park brake shoes should correct this concern.
2008 Land Rover LR2 QuestionsMy 2008 LR2 Land Rover won't start. What could be the cause of it , Any idea ? (1 answer)
It does Make a click sound every time I try. I can see all light on panel,but te engine does not go. It show me some service code.
On 12/5/12 at 44,787 miles all four of the wheel bearings were replaced at Land Rover of San Antonio, part of the Cavender auto group. I heard a roaring noise and they found all four hub bearing assemblies needed to be replaced. The cost was $2,231.62 . I appealed to them that my wife drives this...
2008 Land Rover LR2 RecallsSunroof Glass Becomes Detached From Vehicle
The sunroof glass may bind on opening and closing due to a bracket that may crack and cause a restriction. The glass could fall inside the vehicle with force. Dealers will install retention inserts to both sides of the glass panel guide rails free of charge to resolve the concern.