2010 Kia Soul Repair and Maintenance Costs
A guide to repairs, service, and maintenance costs for your 2010 Kia Soul
Never overpay. Check prices with our estimator
Ask a mechanic in our community
2010 Kia Soul ProblemsManual transmission difficult to shift into 1st gear
The manual transmission may be difficult to shift into 1st gear. Our technicians tell us that a revised shifter lower skirt is available to correct this concern.
2010 Kia Soul QuestionsCan you adjust the guide assembly that attaches to glass on the sunroof? (2 answers)
The drivers side guide assembly is about an inch behind the passenger side when fully closed. The passenger side closes full and then lifts slighty like it is supposed to. The drivers side won't go that far forward.
The radiator fan won't turn off even when my car is turn off for 45 min . I think it's the relay wire but not sure if there is a way to find out . i have unplugged it and it stopped bit soon as I plugged it back on it stayed on.
My 2010 Kia Soul Sport's cooling fan stays on long after car is off (so far its been 45min). It drained battery so I took car to mechanic today & they found nothing wrong. I replaced battery & all seemed ok until I moved the car 30feet. Now fan continues to stay on & once in awhil...
2010 Kia Soul RecallsSide Curtain Airbag
In the event of a crash where the side curtain airbags are deployed a headliner plate can detach, increasing the risk of personal injury. Dealers will correct this concern by adding industrial adhesive strips to secure the headliner plates.
The affected Kia models are being recalled because the brake light switch can fail prematurely, resulting in the loss of brake light operation as well as concerns with other electrical systems including: Cruise control, push-button start feature, shifter, and Electronic Stability Control (ESC) system. Dealers will replace the brake light switch to correct this concern.
The front and/or rear doors have special wiring to control certain lighting functions. Electrical connections in these wire harnesses are soldered to help ensure a solid connection. These vehicles are being recalled because the solder joints in these lighting harnesses may not have been manufactured to the proper specification and when the lights are illuminated under certain conditions, an electrical short circuit may occur that can result in an electrical fire. Dealers will replace the necessary parts to address this concern.