2007 Jeep Liberty Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2007 Jeep Liberty
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
2007 Jeep Liberty ProblemsCheck Engine Light/Misfire Due to Intake Valve Locks/Valves
An engine misfire at idle (rough idle), accompanied by illumination or flashing of the Check Engine Light, could indicate a problem with one or more of the intake valves. Revised intake valves & valve locks are available to address this concern.
A no crank or no start condition may develop due to electronic lockup of the wireless control module (WCM), also referred to as the Sentry Key Remote Entry Module (SKREEM). When this module fails the remote keyless entry system will also not operate. The WCM is commonly replaced to correct this concern.
2007 Jeep Liberty QuestionsWhat do I do when the ESP/BAS, Traction Control and ABS lights all come on and won't turn off? (1 answer)
I drove it to work in the morning, around 8am. I drove it to a client's office around 11am, it was about a 40 minute drive. I parked when I got there and left around 5pm and my jeep wouldn't start. The radio works, the lights work, it beeps at me when i put the key in, just won't tu...
2007 Jeep Liberty RecallsPotential Fuel Tank Leak
It has been determined the fuel tank in these vehicles is at risk of leakage during a rear end collision. To correct this concern dealers will inspect the rear of the vehicle and perform one of the following: A Chrysler designed tow hitch will be installed on vehicles not equipped with a tow hitch, provided the condition of the vehicles can support support proper installation. The tow hitch on vehicles already equipped will be inspected and replaced and/or repaired as necessary, again provided the vehicle is sound and can support proper instillation.