2009 Hyundai Azera Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2009 Hyundai Azera
Never overpay. Check prices with our estimator
Ask a mechanic in our community
2009 Hyundai Azera ProblemsNoise on Startup Due to Failing Timing Chain Tensioner
If you experience excessive engine noise on startup (after the engine has been turned off for several hours) that lasts for more than five or six seconds, turn off the engine and check that the engine oil level is correct. If the oil level is correct, the noise may be caused by the timing chain tensioner. Hyundai has an improved tensioner to correct this problem.
Prior to replacing the automatic transmission fluid (to improve shift quality), make sure that the transmission fluid level is correct. Also, make sure the computer that controls the transmission has the most up-to-date adaptive programming information. When servicing these transmissions be sure to use fluid approved by Hyundai.
Problems with the accelerator pedal position switch may cause the Check Engine Light to illuminate; an improved switch is available to fix this problem.
2009 Hyundai Azera Questionsproblem with locks,have a 2008 azera all locks will lockbutonlydriverwillunlock (1 answer)
i think that is enough detail
The owners manual says the coolant has to be changed every 2 years or 60,000 miles In 2 years I only had 10,000 miles and the dealer wanted to change it. How often do I need Wheel Alignment?
2009 Hyundai Azera RecallsRust Concern with Rear Suspension
The rear suspension is the attaching point for the control arms and other rear suspension components. Road salt and water can accumulate in and around the rear crossmember causing it to rust. Excessive rust could cause one or both rear control arms to separate from the crossmember resulting in a sudden change in vehicle handling, increasing the risk of a crash. Dealers will inspect the rear crossmember and repair or replace it as necessary to correct this concern.
The wiring harness for the right front seat belt tension sensor may become damaged after repeated use of the right front seat belt. If the wiring is damaged, the passenger front airbag will not deploy in the event of a crash. Dealers will repair the vehicles free of charge. The recall began February 22, 2010. The Hyundai recall number is 094.
The wiring harness to the seat belt tension sensor may become damaged after repeated use. If this occurs, the air bag may not deploy in a collision. Dealers will inspect and replace the right front seat belt, install a new tension sensor wiring harness clip if necessary, and reroute the right front seat belt tension sensor wiring. The Hyundai recall number is 094. This recall began on February 8, 2010.