2008 Hummer H2 Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2008 Hummer H2
Never overpay. Check prices with our estimator
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
2008 Hummer H2 ProblemsCheck Engine Light Due to Gas Cap Issue
A Loose or worn gas cap may cause Check Engine Light to illuminate.
The steering wheel position sensor may fail, resulting in the service stability message being displayed.
2008 Hummer H2 Questionsunusual noise on the under chassis of my 2008 hummer h2 what should i need to do (1 answer)
unusual noise on the under chassis of my 2008 hummer h2 what shiuld i need to do almost replaced all the rubber on my under chassis but stil the noise is still there when use my turn left or right and when i press the accelarator please i need your help thanks
pushed button, it just blinks does not change anything.
When I hook up charger there is a faint buzzing sound coming from a small canister near the fuse box. It will buzz for a few seconds then stops.
2008 Hummer H2 RecallsPossible Under Hood Electrical Fire
The heated washer module under the hood could overheat due to excessive current draw. Under certain conditions, this could result in an under hood fire. This previous recall attempt in 2008 to repair this concern did not have the expected success. Dealers will now permanently disable and remove the heated washer module to correct this concern. This recall is expected to begin on June 20, 2010.
The wiring to the washer system heater may overheat due to a failure in the heater module. This could cause other electrical features to malfunction, smoke to develop, and an electrical fire could result. Dealers will install a wire harness with an inline fuse to protect the washer heater module. This recall is expected to begin on September 12, 2008. The General Motors recall number is 08048.
On some trucks, wiring for the ABS wheel speed sensors may be reversed, which could cause increased stopping distance. This condition could increase the risk of a crash. Dealers will correct the ABS wheel speed sensor wiring and reprogram the brake control module if necessary.