2000 Honda Prelude Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2000 Honda Prelude
Never overpay. Check prices with our estimator
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
2000 Honda Prelude ProblemsVibration When Braking Due to Rotor Problem
The front brake rotors can warp and cause a vibration when braking. The rotors will need to be machined or in cases where they are worn to thin, replaced to correct this issue.
On some models the manual transmission fifth gear can grind on upshift due to a misaligned fifth shift fork. The transmission will have to be removed and disassembled and the fifth gear, the fifth sleeve set and the fifth gear shift fork will have to be replaced to repair this issue.
A clunk noise can develop from the rear due to upper damper spacers compressing over time. Installing new damper collars is required to stop the noise.
2000 Honda Prelude Questionsis my mechanic over charging me? see bill attached thank you so much (1 answer)
crank pulley and keyway 239 180
drive belts 85 90
timing cover 75 90
oil pan and oil pan gasket
oil change 15 18
total 609 638
tax 53.29 0
i started my car today and when i shifted to reverse is started shaking a lil bit. as i was driving down the street though the front passenger side was rattling. same thing happens when i break.....what to do??????
2000 Honda Prelude RecallsHonda Recalls 1997-2002 Due to Ignition Switch Interlock Failure
Honda has recalled 1997-2001 Prelude, 1999-2002 Accord, and 1999-2000 Acura TL models because the ignition switch interlock may fail. If this happens, the key will be removable before the engine is in the "Park" position, which could cause the vehicle to roll and crash. Dealers will confirm interlock function and vehicles will receive an updated interlock lever free of charge.