2007 GMC Yukon XL Denali Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2007 GMC Yukon XL Denali
Never overpay. Check prices with our estimator
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
2007 GMC Yukon XL Denali ProblemsImproper HVAC Temperature and/or Air Delivery Due to Failed Mode Door Actuator
One or more heater & AC (HVAC) temperature and/or air delivery mode door actuator may fail, resulting in improper temperature or air delivery. If this occurs, fault code(s) should be stored in the HVAC control module which should assist in diagnoses.
The rear window defogger may stop working due to a wire terminal broken off of the rear glass. Our technicians tell us that terminal can be reattached using a special glue or silver solder.
It is common for the fuel level sensor in the fuel tank read the fuel level incorrectly. The sensor must be replaced to correct the condition. Our technicians recommend having the complete fuel pump module replaced on high mileage vehicles.
2007 GMC Yukon XL Denali QuestionsThe passenger side mirror no longer folds in electronically. What is the likely cause and more importantly, repair solution? (1 answer)
After multiple events of car dying AAA told us our battery was bad, so we replaced it. The battery is several months old and now it is beginning to die again. We just drove 6 1/2 hour drive to Idaho, after 2 days of being parked it died. We jumped it and drove home fine, now 2 days later it...
2007 GMC Yukon XL Denali RecallsPassenger Frontal Air Bag Inflator Ruptures On Deployment
The passenger frontal air bag inflator may rupture on deployment, causing metal fragments to come through the air bag and injure occupants. Dealers will replace the passenger frontal air bag inflator free of charge to resolve the concern.
The heated washer module under the hood could overheat due to excessive current draw. Under certain conditions, this could result in an under hood fire. This previous recall attempt in 2008 to repair this concern did not have the expected success. Dealers will now permanently disable and remove the heated washer module to correct this concern. This recall is expected to begin on June 20, 2010.