2010 GMC Yukon XL 1500 Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2010 GMC Yukon XL 1500
Never overpay. Check prices with our estimator
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
2010 GMC Yukon XL 1500 ProblemsReduced Power and Check Engine Light
The 2008-2014 GMC Yukon XL 1500 uses a throttle position sensor (TPS) which commonly fails and causes:
- Check engine light illumination
- Reduced Power message
- OBD trouble code P2135
This issue is related to the throttle position sensor, and can be caused by faulty wiring to the TPS, bad connection at the TPS, or a failed TPS.
To correct this issue, the wiring harness, connector, and throttle position sensor must be inspected, tested, and/or replaced. The most common cause is a faulty TPS.
Illumination of the Check Engine Light can be caused by a loose or worn gas cap.
The spark plugs should be replaced every 100,000 miles. Our technicians recommend replacing the spark plug wires also at this time.
2010 GMC Yukon XL 1500 QuestionsI had my mechanic fix my brakes but they still make noise, he says to run (1 answer)
the Yukon xl
I bought a used 2010 yukon xl with 16500 miles from dealer. the vehicle is certified, my problem is a get a quick vibration in front wheels and steering wheel when vehicle is going between 38 and 40 mph....this only happens when vehicle is first driven in morning or sits for a while...when the vi...
2010 GMC Yukon XL 1500 RecallsPassenger Frontal Air Bag Inflator Ruptures On Deployment
The passenger frontal air bag inflator may rupture on deployment, causing metal fragments to come through the air bag and injure occupants. Dealers will replace the passenger frontal air bag inflator free of charge to resolve the concern.